Chrome 12 Volt Universal Steering Column Mount Horn Button for all makes.

15 Amp Circuit Breaker for Club Car Powerdrive battery charger +++ Also 1996 to 2007 Yamaha G19 and G22 with 48 volt MAC brand battery charger.

Sealed Horn or Brake Stop Light Switch +++ Can be used as replacement horn switch on E-Z-GO as well as Nordco Marketeer model 150 and Nordskog models 280 and 282 and others +++ NOTE: Uses 5/8" diameter mounting hole.

Voltage Reducer with wiring harness for all carts with 36 or 48 volt systems... Converts these voltages down to 12 volts for running lights, radios and other 12 volt accessories. Has a high amp output of 30 amps peak.

NO LONGER AVAILABLE, Use EL22-615 +++ Voltage Reducer for all carts with 36 or 48 volt systems... Converts these voltages down to 13.4 volts for running lights, radios and other 12 volt accessories... Has a high amp output of 30 amps peak.

NO LONGER AVAILABLE +++ Reducer Wiring Kit for voltage reducer numbers EL22-600 and EL22-610.

50 amp, 36 volt Circuit Breaker for 36 volt Total Charge III and Total Charge IV battery chargers used on E-Z-GO +++ Can be used in other applications as well.

NO LONGER AVAILABLE +++ Use SO66-050 +++ Genuine New Old Stock 12 volt, 6 Terminal Reversing Solenoid with silver contacts for 1982 to 1989 Yamaha G1 2 cycle gas +++ Will replace White-Rogers 6 terminal 586 series reversing solenoid on 1990s Cushman GT-1 and UTV MAX electric carts.

Sealed Horn or Brake Stop Light Switch +++ OEM horn switch on 1993 and newer E-Z-GO gas and electric Marathon, TXT, Medalist and 835 industrial model.

NO LONGER AVAILABLE, Use SO66-060 +++ Replacement 36 volt, 6 terminal reversing Solenoid with silver contacts for 1982 to 1989 Yamaha G1 Electric.

NO LONGER AVAILABLE +++ Solenoid Repair Kit for 1982 to 1989 Yamaha G1, 2 cycle gas and electric +++ Contains two plastic end caps, one contact plate, one contact plunger, one spacer, one spring and hardware.

Starter/Generator Field Coil Housing with Coils for Hitachi style Starter/Generator on 1977 to 1981 Harley Davidson and 1982 to 2008 Columbia Par Car +++ 1978 to 1993 E-Z-GO with 2 cycle engine +++ 1985 to 1995 Club Car. +++ 1979 to 1989 Yamaha models G1-G16 +++ 1986 to 1997 Taylor-Dunn model R-680 truck.

14mm by 1.5 tpi Nut for Starter/Generator on 1969 to 1981 Harley Davidson and 1982 and newer Columbia Par Car +++Also fits all Bosch, Hitachi, Reliance and others used on E-Z-GO, Club Car, Hyundai, Melex and Yamaha.

NO LONGER AVAILABLE, Use SO22-040 +++ Solenoid for 1985 to 1991 Yamaha G2 electric only, 36 Volt with 4 Terminals and silver contacts.

Replacement Armature for Starter/Generator on 1991 and newer E-Z-GO Medalist and TXT with 4 cycle engine +++ 1996 to 2009 Yamaha G11, G16, G20, G21, G22, G27 and G28, also 2007 and newer model YDR "The Drive".

Heavy Duty 12 Volt Solenoid with silver contacts for Nordskog +++ 1986 to 1987 Taylor-Dunn model R-680 truck +++ 1990 to 1995 Hyundai gas +++ Will also work on GT-370/371 up to serial number 53473 +++ As well as 1985 to 1991 Yamaha gas G2 only.

40 Amp Fuse Assembly with Plastic Cover for Taylor-Dunn, Harley Davidson and many others with Lester Charger.

Brush Set for Bosch and Hitachi Starter/Generator on 1969 to 1981 Harley Davidson and 1982 to 1995 Columbia Par Car +++ 1984 to 1996 Club Car +++ 1980 to 1993 E-Z-GO +++ 1978 and newer Yamaha 1978 G1-G28 and 2007 and newer YDR "The Drive" +++ 1991 and newer Hyundai +++ 1986 to 1997 Taylor-Dunn model R-680.

36 Volt, 4 Terminal, Heavy Duty Solenoid with silver contacts for 1987 and newer Columbia Par Car +++ 1989 and newer E-Z-GO electric +++ 1988 and newer Club Car electric industrial vehicles +++ 1990 and newer Yamaha electric models G8, G9, G11, G14, G16 +++ 1990 to 1994 Cushman GT-1 and GT America +9++ 2006 and newer Cushman Titan 36 volt model +++ 1986 and newer Melex with electronic speed control +++ Also Taylor-Dunn model B-150 & others +++ Also 1992 and newer Nordskog models 280 and 282 A, B, C and D +++ Also Jacobsen and Motrec.

NO LONGER AVAILABLE +++ Starter/Generator Spacer Bushing for all starter/generators with 17mm (.670") diameter shafts +++ Used to space pulley outward.