5/16"-18 Nylock Nut for Front and Rear Bumper on 1984 to 1992 Club Car model DS +++ Use with mounting bolt number BD44-271 and BD44-362. Two each required +++ Also for Brake Linkage on Nordskog and many other carts +++ Can be used on battery hold down rods.

1"-14 Front Spindle Castle Nut for 2000 and newer Columbia Par Car Burden Carrier Payloader models BC2, BC3 and B4 +++ Front Spindle Castle Nut for 1978 to 1982 Nordskog model 262 and 264 Cargo Carrier and 1983 and newer Nordskog and US Electricar Legend models 280 and 282 series A,B,C and D +++ Also Front Spindle Nut for all 1965 to present E-Z-GO four wheel models..

1/4"-20 Nylock Nut for many applications on Club Car, E-Z-GO, Harley Davidson, Columbia Par Car, Legend, Nordskog and many other carts +++ Can be used on battery hold down rods.

5/16"-24 Nylock Nut used in various places on E-Z-GO, Legend, Harley Davidson and Columbia Par Car, Taylor-Dunn and many more.

1"-14 Thin Castle Nut for 1981 and newer E-Z-GO front spindle.

1/4"-20 standard course thread Nut for many applications on 1963 and newer Harley Davidson. +++ Also Club Car, Cushman, E-Z-GO, Legend, Pargo, Jacobsen, Taylor-Dunn and others.

1/2"-20 Thin Nylock KingPpin Nut for late 1977 Harley Davidson model DE-40 after serial number 8D10057H7 +++ Also 1979 to 1982 model MGIV (Master Glide IV) +++ Also Nut for upper tie rod (ball joint) on 2014 Summit SP5, SU5, SU5-2

1/2"-20 SAE Fine Thread Nut for rear shock bolt on 1966 to 1981 Harley Davidson and 1982 to 1988 Columbia Par Car +++ Many other applications on 1963 and newer Harley Davidson as well as Cushman, E-Z-GO, Taylor-Dunn and others.

3/8"-16 Standard Course Thread Nut for many applications on 1963 and newer Harley Davidson +++ Also Club Car, Cushman, E-Z-GO, Legend, Pargo, Jacobsen, Taylor-Dunn and others.

3/8"-16 Locking Whiz Type Flange Nut used on Brake Pedal Pivot Bolt on 1975 to 1994 E-Z-GO pre-Medalist models +++ Used on Shoulder Bolt on front of Rear Leaf Spring for all 1994 and newer E-Z-GO models +++ Many other carts and applications.

5/16"-24 SAE Fine Thread Nut for many applications on 1963 and newer Harley Davidson, Cushman, E-Z-GO, Taylor-Dunn and others.

12mm-1.75 Slotted Castle Type Nut for Upper King Pin on ALL Melex four wheel models 102, 212, 252, 412, 512, 625, 663F2H, 666F2H and 667F2H +++ Also 1999 Taylor-Dunn model ER-200 Rover.

19mm-1.5mm Spindle Castle Nut for Melex models 512 and 625 +++ Also 1999 Taylor-Dunn model ER-200 Rover.

1/2"-20 Castle Nut for Tie Rod End for 1969 to 1971 Taylor-Dunn models B, BN and M+++ 1972 to 1975 Taylor-Dunn Tee Bird models GT-360 and GT-361 +++1975 to 1985 Tee Bird models GT-370 and GT-371 +++ 1984 and newer Taylor-Dunn models B-248 and B-254 +++ 1989 and newer models B-660, B-661 and B-661E +++ Model R-380 electric and 1998 and newer gas model R-680 +++ Many other applications.

7/16"-20 Thin Flex Lock Nut for Steering Pivot Pin on Taylor-Dunn model ET-150 and others.

Rocker Arm Adjusting Nut for 1985 to 1996 Yamaha G2, G5, G8, G9, G11 and G14 with 4 cycle engine +++ Also for 1986 to 1997 Taylor-Dunn model R-680 engine.

1/4"-28 Thin Nylock Nut for mounting Carburetor on 1963 to 1987 Harley Davidson with Tillotson carburetor +++ Many other applications.

1/4"-20 Brass Nut for Speed Control Board on Cushman electric models 731, 732, Electric Deluxe models 881407, 881408, 881413 +++ Also Executive model 898322 and Titan models 898315 and 898316 and others +++ Also used on foot switch on Gran Cushman Golfster models GC300 and GC400 +++ Also used on Forward and Reverse Contact on many older Cushman golf carts such as Deluxe models 881407, 881408 +++ Also Nordskog.

5/8"-18 Thin Jam Nut on crankshaft to hold Primary Clutch on 1963 to 1981 Harley Davidson models D, DF, DC and D4 +++ Harley Davidson and Columbia Par Car Pitman Arm Retaining Nut +++ Steering wheel nut for Taylor-Dunn +++ Front Axle Nut for 1965 to 1984 Cushman 3 wheel Haulster and Truckster.

3/4"-16 Thin Jam Nut for Front Axle 1965 to 1993 E-Z-GO three wheel +++ Jam Nut on 1953 to 1967 Cushman 3 wheel +++ 1965 to 1984 Cushman 3 wheel Haulster and Truckster +++ Motrec steering wheel nut +++ Pargo and Legend three wheel front axle nut +++ Marketeer 3 wheel front axle jam nut +++ Motor Jam Nut for 15 tooth motor sprocket on Taylor-Dunn +++ Speed Control Bushing Nut on Harley Davidson, E-Z-GO, Legend, Jacobsen and Melex +++ Steering Box Jam Nut on Ross Steering Box on 1979 to 1983 Club Car.