Press On Rear Axle Bearing Retainer for 1985 to 1994 Cushman Minute Miser and others. .775 ID

Inner Rear Axle Bearing for 1953 to 1962 Cushman series 730 and 731 Industrial carts and 1963 to 1994 Minute Miser +++ Also 1954 to 1958 24 and 26 volt Golfster series 732 and 733.

Pinion Bearing for Nordskog model 323 Tote-N-Tow +++ Model 535 Errand Master +++ Nordskog models 280/282 B,C and D models +++ Cushman differential pinion bearing.

Bearing and Collar for 1991 to 1994 Cushman GT1 beginning with serial number extension 9110 for models 898369 and 898370 +++ Mounts on power frame and acts as secondary clutch thrust bearing.

Inner Rear Axle Bearing for 1984 and newer Club Car model DS and Precedent +++ Fan Side Crankshaft Bearing for 1982 to 1995 Columbia Par Car/Harley and 1996 to 2000 Columbia Par Car Rear Axle Bearing +++ Differential Bearing on some Cusman +++ Differential Bearing for 1991 and newer E-Z-GO 4 cycle +++ Input Shaft Bearing opposite output side on Yamaha gas carts models G1, G2, G8, G9, G11, and G14 and Input Shaft Bearing on inner side of 1992 and older Yamaha model G9 electric +++ Differential Bearing on Cushman, Pargo and Noland with Terril Differential and Drive End Motor Bearing for Westinghouse motor on 1960s Marketeer models 425 and 427.

CURRENTLY ON BACK ORDER +++ Use BE33-180 +++ Outer Rear Axle Seal and Retainer for 1989 to 1994 Cushman Turf Tucksters and Haulsters with 22 hp engine and 327 Kawasaki and Suzuki 660 three cylinder engines as well as Perkins diesel.

ON BACK ODER ++ You can replace just the seal BE33-180 +++ Axle Hub Seal and Retainer for 1989 and newer Cushman Turf Truksters and Haulsters with Suzuki 3 cylinder 660 or 970 engines or Perkins Diesel.

CURRENTLY ON BACK ORDER +++ Axle Hub Seal Retainer Backing Ring for 1989 and newer Cushman Turf Truksters and Haulsters with Suzuki 3 cylinder 660 or 970 engines or Perkins Diesel.

CURRENTLY ON BACK ORDER +++ Square Outer Rear Axle Bearing Retainer for Dana differential on 1993 and newer Columbia Par Car electric Burden Carriers +++ 2005 and newer Cushman Industrial models 875, Titan and Personnel Carrier with Dana differential. +++ Outer rear axle seal on 1987 to 1990 E-Z-GO gas GXT-1500 and GXI-1500 +++ 2000 and later E-Z-GO model 960 Cargo and Personnel Carriers +++ 1994 and newer E-Z-GO Cargo and 1991 to 1993 Personnel Carriers +++ Taylor-Dunn electric with Dana differential +++ 1992 and newer Legend Nordskog model 280A after serial number 280A92H019 +++ Motrec model E-302, E-330 and others +++ Also Jacobsen and Toro.

Rear Axle and Motor Bearing for Club Car +++ Columbia Par Car +++ Cushman +++ E-Z-GO +++ Harley Davidson +++ Noland +++ Nordskog, Pargo +++ Yamaha +++ and Taylor-Dunn

Rear Axle Bearing Race for 1963 to 1972 Harley Davidson gas models and 1963 to 1971 electric +++ E-Z-GO some pre 1978 +++ Westinghouse Marketeer models 436 and 437 with tapered axle. +++ 1960 to 1965 Cushman Golfster and Industrial series 731 and 732 and Truckster series 780 and 1960 to 1965 Truckster series 780 +++ Also Nordskog, Turf Rider IV and some Melex.

NO LONGER AVAILABLE +++ .005" Thick Rear Axle Bearing Shim for 1963 to 1972 Harley Davidson gas models D, DF, DC and D4 +++ Also 1963 to 1971 Harley Davidson electric models DE, DEF, and DEC +++ Some pre 1978 E-Z-GO +++ 1960 to 1965 Cushman Golfster & Industrial series 731 and 732 & Truckster series 780 +++ Also Nordskog Westinghouse models 436 and 437 with a tapered keyed rear hub +++ Also Turf Rider IV rear axle bearing +++ Also some Melex

.010" Thick Rear Axle Bearing Shim for 1963 to 1972 Harley Davidson gas models D, DF, DC and D4 +++ Also 1963 to 1971 Harley Davidson electric models DE, DEF, and DEC +++ Some pre 1978 E-Z-GO +++ 1960 to 1965 Cushman Golfster & Industrial series 731 and 732 & Truckster series 780 +++ Also Nordskog Westinghouse models 436 and 437 with a tapered keyed rear hub +++ Also Turf Rider IV rear axle bearing +++ Also some Melex

Tapered Bore Rear Axle Bearing for 1963 to 1972 Harley Davidson gas models D, DF, DC and D4 +++ Also 1963 to 1971 Harley Davidson electric models DE, DEF, and DEC +++ Some pre 1976 E-Z-GO +++ 1960 to 1965 Cushman Golfster & Industrial series 731 and 732 & Truckster series 780 +++ Also Nordskog Westinghouse models 436 and 437 with a tapered keyed rear hub +++ Also Turf Rider IV rear axle bearing +++ Also some Melex

NO LONGER AVAILABLE +++ NOS Stained Tapered Bore Rear Axle Bearing for 1963 to 1972 Harley Davidson gas models D, DF, DC and D4 +++ Also 1963 to 1971 Harley Davidson electric models DE, DEF, and DEC +++ Some pre 1976 E-Z-GO +++ 1960 to 1965 Cushman Golfster & Industrial series 731 and 732 & Truckster series 780 +++ Also Nordskog Westinghouse models 436 and 437 with a tapered keyed rear hub +++ Also Turf Rider IV rear axle bearing +++ Also some Melex

Rear Axle Bearing Retainer Gasket for 1973 to early 1977 Harley Davidson gas models D and D4 and electric models DE and DE4 +++ 1973 to 1976 E-Z-GO +++ 1960 to 1975 Cushman models 731, 732, 734, 735, 736, and GC300 and GC400 +++ Westinghouse model 262 and HMK Marketeer models 438 and 439.

Open Sided Carrier Gear Bearing for 1965 to 1986 Pargo +++ 1984 and newer "Eagle" Pargo models 875, 950, and 950-S +++ 1976 to 1984 Club Car with Terrill differential +++ 1984 and newer Club Car model DS and Precedent with either Kawasaki or Graziano rear differentials +++ 1991 and newer E-Z-GO 4 cycle gas output shaft gear +++ 1982 to 1986 Columbia Par Car carrier bearing on models G3 and G4 +++ Pre-1993 Yamaha electric differential bearing on models G1, G2, G8, and G9 +++ Also Nolan as well as Cushman.

Motor Input Pinion Bearing for 1969 to 1975 Pargo +++ Cushman with Terrill differential with 16 spline motor. Also Cushman GT1 intermediate shaft bearing +++ 1984 to 1986 Club Car motor side intermediate gear with Fuji differential +++ Also Legend and Noland.

NOW AVAILABLE +++ Rear Axle Roller Bearing for 1973 to early 1977 Harley Davidson gas models D and D4 and electric models DE, DEC, and DE4 from 1973 to early 1977 and 1976 to 1978 electric model DE-40 +++ E-Z-GO golf cart mid May of 1972 through October 1975 and Industrial model GXT1500 and 1991 to 2006 Personnel and Cargo Carriers and other industrial vehicles +++ 2006 and newer Cushman Titan +++ Nordskog, Toro +++ Westinghouse Marketeer models 436 and 437 with splined rear axle and Westinghouse HMK Marketeer models 438 and 439 from 1976 to 1978 +++ Jacobsen with Dana splined axle +++ Taylor-Dunn and Motrec E-330 rear axle bearing +++ Also Toro Workmaster

Intermediate Pinion Shaft Bearing for 1965 to 1986 Pargo models 850, 851, 852, and 882 and early 1980s "Eagle" Pargo models 830 and 873 and 1984 and newer "Eagle" Pargo models 875, 950, and 950-S beginning with serial numbers XXX 494 283 all with Terrill differential +++ Club Car located on opposite motor input on 16 spline differentials and input side of 1984 to mid 1986 Fugi differentials and both sides of input shaft on mid 1986 to 2005 electric differentials and both sides of the pinion on some differentials with taper shaft motors +++ Input Shaft Bearing on1991 and newer E-Z-GO gas 4 cycle differentials +++ Also input shaft bearing on Harley, Cushman, Noland and Hyundai differentials +++ Also 1992 and older Yamaha electric G1, G2, G8, G9, input shaft bearing drive side, counter shaft bearing both sides on G1 to G14