Primary Clutch Idler Bearing for Cushman models GC300 and GC400 and Town and Fairway gas models 881859 and 898201 +++ Also Deluxe and Executive models 881412 and 881414 and others.

Clutch Throw Out Bearing for 1998 to 2005 Cushman Truckster with 970 Suzuki four cylinder 34 hp gas engine or Perkins diesel engine.

Clutch Throw Out Bearing for 1960 and newer Cushman model 735, Truckster or Haulster with 18 or 22 Horsepower OMC engine.

Clutch Throw Out Bearing ONLY for 1960 and newer Cushman model 735, Truckster or Haulster with 18 or 22 Horsepower OMC engine... Also 1989 to 1990 E-Z-GO GTX-1500 and GXI-1500 with Onan engine... Also Jacobsen Industrial Vehicles with Onan gas engine.

Clutch Throw Out Bearing for 1988 to 2003 Cushman Truckster & Haulster with 327 Diahatsu 27hp three cylinder engine +++ Also Kubota and Perkins diesel engines.

Centrifugal Clutch Mounting Plate Pilot Bearing for 1960 and newer Cushman model 735, Truckster, or Haulster with 18 or 22 Horsepower OMC engine.

Bearing and Collar for 1991 to 1994 Cushman GT1 beginning with serial number extension 9110 for models 898369 and 898370 +++ Mounts on power frame and acts as secondary clutch thrust bearing.

Primary Drive Clutch Bushing and Pivot Pin Kit for 1989 to 1994 Cushman GT-1 with 8 hp Kohler +++ 1991 to 1993 Cushman GT America +++ 1991 to 1994 Bellhop-2 and 1994 UTV-MAX +++ Also Taylor-Dunn.

Thin Steel Dust Shield for 1973 to early 1977 Harley Davidson models D and D4 +++ 1973 to 1976 E-Z-GO X440 and X444 Marathon models with Dana Differential with 12 bolt rear cover +++ 1960 to 1975 Cushman models 731, 732, 734, 735, 736, and GC300 and GC400.

Transmission Bearing for many Cushman models from 1965 to 1995 +++ Transaxle Inner Input Shaft Bearing for 1988 and newer E-Z-GO electric and 1991 and newer E-Z-GO 4 cycle gas +++ 1984 to 1991 Club Car gas Dynamic Balancer bearing +++ Also 1990 to 2013 Columbia Par Car electric input shaft bearing and gas balancer shaft bearing +++ Also 1986 to 2014 Yamaha electric input shaft bearing and electric steering pinion bearing +++ Also Taylor-Dunn, Hyundai, Nordskog and Motrec input shaft bearing on electric Dana differential +++ Also used on Toro with Dana differential..

Main Drive Gear Bearing with external snap ring for 1965 to 1968 Cushman Turf Truckser and Haulster and 1970 to 1994 Haulster.

Transmission Bearing for 1965 to 1994 Cushman Turf Truckser and Haulster.

Shift Linkage Bushing for 1960s to 1970s Cushman Truckser and Haulster.

Commutator End Bearing for Starter/Generator on 1972 to 1995 Harley. +++ Com End on 1978 to 1993 E-Z-GO 2 cycle and 1991 and newer 4 cycle +++ Com End on Club Car +++ Com end on 1978 and newer Yamaha G1-G28 and YDR "The Drive". +++ Com end on Melex, and Hyundai +++ Com end on 1986 to 1997 Taylor-Dunn model R-680 truck. +++ Clutch Pilot Bearing for 1960 and newer Cushman model 735 and ruckster, or Haulster with 9hp, 18hp or 22hp OMC engine.