Primary Clutch Idler Bearing for Cushman models GC300 and GC400 and Town and Fairway gas models 881859 and 898201 +++ Also Deluxe and Executive models 881412 and 881414 and others.

Front Hub Wheel Bearing Race for 1953 to 1959 three wheel Cushman series 730, 731, 732 and 733.

Front Hub Wheel Bearing for 1953 to 1959 three wheel Cushman series 730, 731, 732 and 733.

Inner Rear Axle Bearing for 1953 to 1962 Cushman series 730 and 731 Industrial carts and 1963 to 1994 Minute Miser +++ Also 1954 to 1958 24 and 26 volt Golfster series 732 and 733.

Drive End Bearing on 1968 to 1974 Gran Cushman Golfster electric models GC300 and GC400 and others... Also Taylor-Dunn.

Oil Flinger for front hub on late 1950s to mid 1960s Three wheel Truckster model 780 and Hauster +++ Also 1968 to 1974 Gran Cushman Golfster 3 wheel model GC300 as well as model 736 and other 3 wheel Cushmans such as Deluxe, Executive, Champion, Trophy, Director and industrial 3 wheel Minute Misers from the 1960s to early 1970s.

Front Spindle Thrust Washer for 1976 to 1983 Cushman Titan +++ 1984 to 1994 Hauslster, 1989 to 1994 Truckster +++ Turf Trucksters with 3 cylinder 327 Suzuki 660 engine +++ 1990 to 1991 Eagle +++ 1992 to 1994 F-2 and F2J, 3 Wheel Stock Chaser +++ 1991 to 1994 Bellhop.

King Pin Thrust Bearing for 1976 to 1994 Cushman Titan +++ Also 1982 to 1994 Haulster and all 4 wheel Turf Trucksters.

Stainless Steel Front Spindle Thrust Washer for E-Z-GO built from January 2001 and newer +++ Also January 2001 and newer E-Z-GO, Jacobsen and Cushman industrial carts models MPT 1000, Industrial 1000, Commander 2100 and Jacobsen Hauler 1000.

Electric Motor Bearing on Harley Davidson +++ E-Z-GO +++ Club Car +++ Cushman +++ Taylor-Dunn +++ Nordskog +++ Yamaha and others with General Electric, Baldor or Hitachi motors.

Clutch Throw Out Bearing for 1998 to 2005 Cushman Truckster with 970 Suzuki four cylinder 34 hp gas engine or Perkins diesel engine.

Clutch Throw Out Bearing for 1960 and newer Cushman model 735, Truckster or Haulster with 18 or 22 Horsepower OMC engine.

Pinion Bearing for Nordskog model 323 Tote-N-Tow +++ Model 535 Errand Master +++ Nordskog models 280/282 B,C and D models +++ Cushman differential pinion bearing.

Clutch Throw Out Bearing ONLY for 1960 and newer Cushman model 735, Truckster or Haulster with 18 or 22 Horsepower OMC engine... Also 1989 to 1990 E-Z-GO GTX-1500 and GXI-1500 with Onan engine... Also Jacobsen Industrial Vehicles with Onan gas engine.

Clutch Throw Out Bearing for 1988 to 2003 Cushman Truckster & Haulster with 327 Diahatsu 27hp three cylinder engine +++ Also Kubota and Perkins diesel engines.

Centrifugal Clutch Mounting Plate Pilot Bearing for 1960 and newer Cushman model 735, Truckster, or Haulster with 18 or 22 Horsepower OMC engine.

Bearing and Collar for 1991 to 1994 Cushman GT1 beginning with serial number extension 9110 for models 898369 and 898370 +++ Mounts on power frame and acts as secondary clutch thrust bearing.

Inner Rear Axle Bearing for 1984 and newer Club Car model DS and Precedent +++ Fan Side Crankshaft Bearing for 1982 to 1995 Columbia Par Car/Harley and 1996 to 2000 Columbia Par Car Rear Axle Bearing +++ Differential Bearing on some Cusman +++ Differential Bearing for 1991 and newer E-Z-GO 4 cycle +++ Input Shaft Bearing opposite output side on Yamaha gas carts models G1, G2, G8, G9, G11, and G14 and Input Shaft Bearing on inner side of 1992 and older Yamaha model G9 electric +++ Differential Bearing on Cushman, Pargo and Noland with Terril Differential and Drive End Motor Bearing for Westinghouse motor on 1960s Marketeer models 425 and 427.

Fork Upper Neck Ball Bearings for 1964 and newer Cushman three wheeled carts +++ Set of 20.

Rear Axle and Motor Bearing for Club Car +++ Columbia Par Car +++ Cushman +++ E-Z-GO +++ Harley Davidson +++ Noland +++ Nordskog, Pargo +++ Yamaha +++ and Taylor-Dunn