6 Spine Crankshaft Assembly
Price: $349.50

Part Number: EN120

OEM Part Numbers - 23703-79

Item Description -
Brand New Crankshaft Assembly for late 1971 to 1981 Harley Davidson, (can be used on carts built from 67 through early 71 by using drive cup CL135 or primary clutch kit number CL129) NOTE: Includes new EN127 piston pin needle bearing. Very limited amount until gone.

Rebuild Kit, Tillotson Carb
Price: $19.94

Part Number: FU120

OEM Part Numbers -27131-66, 27134-66

Item Description -
SALE PRICE $19.94, was $29.94. Save $10.00. Carburetor Rebuild Kit for 1963 to 1981 Harley Davidson models D, DF, DC, and D4 with Tillotson carburetor models HL-212A, HL-231A and HL-231B, HL231E, Also fits 1971 to 1975 E-Z-GO with HL-287 Tillotson carb and pre 1975 E-Z-GO with HL-279 carb. Includes welch plug, inlet valve needle and seat, copper seat washer, inlet valve lever, diaphragm cover gasket, diaphragm, fuel pump gasket, fuel pump diaphragm, inlet cover gasket and carburetor mount gasket. VERY IMPORTANT NOTE: In this kit the flapper valve and diaphragm have been combined into one part which is the thin bronze colored diaphragm with flappers shown in the picture above on the left side.

Carburetor, Tillotson
Price: $169.87

Part Number: FU124

OEM Part Numbers - 27158-67A

Item Description -
SALE PRICE $169.87, was $221.85, Tillotson Double Diaphragm Carburetor for 1967 to 1981 Harley Davidson, Carburetor model HL-231.

Bolt in Replacement Seats
Price: $298.50

Part Number: BD113

OEM Part Numbers - HD 52049-63B, 52051-63C,

Item Description -
NOW AVAILABLE! Set of Two Bolt-in Custom Replacement Seats for 1963 to 1966 gas Harley Davidson models D, DF and DC and 1966 to 1971 models D, Also 1963 to 1966 electric models DE, DEF, and DEC, and 1967 to 1971 model DE. All seats are made with marine grade vinyl and have a sewn in moisture barrier between the vinyl and the cushion. You can have one color or a two tone with the pleated insert a different color. Choose from the following colors: Black Pleated, White Pleated, Grey Pleated, Orange Pleated, Red Pleated, Blue Pleated , Yellow Pleated, White, Orange, Grey, Black, Dark Blue (regimental), Light Blue, Tan, Dark Red, Red, Yellow, Dark Green (hunter), Beige (buff). When ordering online put your color preferences in the shipping comments box or you can call in your order. Your custom seats will ship in one to two weeks. Seat bottom measures 16-1/2" x 14-1/4", the top of the back is 14-1/4" wide and the bottom of the back is 16-3/4" and it measures 12" top to bottom, NOTE: These seat backs bolt to the back steel seat pan. NOTE: These will not fit DE40 and MGIV models. Click on this picture to see the chart of available colors.

Ignition Coil & RPM Limiter
Price: $386.28

Part Number: IG411

OEM Part Numbers -1012520

Item Description -
Ignition Coil with built in RPM Limiter for 1984 to 1989 Club Car, has three lead wires (brown, red, white), and triangular plug connector with two female and one male bullet type connector, and one single black lead with insulated female bullet type connector. NOTE: Only one available!, No longer available after this one is gone.

Cushman Wheel Adapters, Set of 4
Price: $247.50

Part Number: WM110

OEM Part Numbers -

Item Description -
NEW PRODUCT! Set of Four Custom 2" wide Wheel Adapters to adapt golf cart standard 4 on 4 pattern wheels to Cushman 4 on 3-3/4" bolt circle. This allows you to use any aftermarket custom aluminum or chrome wheels on your restored beauty. NOTE: These are machined from solid billet 6061 aluminum and include hardened grade 8, 1/2"-20 tpi studs, 1/2"-20 lug nuts sold separately. Bolts to your cart using your stock 7/16"-20 lug nuts.

Bolt in Replacement Seats
Price: $298.50

Part Number: BD114

OEM Part Numbers - HD 52049-75A, 52051-72, 52051-75A

Item Description -
Set of Two Bolt-in Custom Replacement Seats for 1972 to 1980 gas Harley Davidson model D and D4 and 1972 to 1976 electric models DE and DE4 and 1977 to 1980 electric model DE-3 All seats are made with marine grade vinyl and have a sewn in moisture barrier between the vinyl and the cushion. You can have one color or a two tone with the pleated insert a different color. Choose from the following colors: Black Pleated, White Pleated, Grey Pleated, Orange Pleated, Red Pleated, Blue Pleated , Yellow Pleated, White, Orange, Grey, Black, Dark Blue (regimental), Light Blue, Tan, Dark Red, Red, Yellow, Dark Green (hunter), Beige (buff). When ordering online put your color preferences in the shipping comments box or you can call in your order. Your custom seats will ship in one to two weeks. Seat bottom measures 16-1/2" x 14-1/4", the top of the back is 14-1/4" wide and the bottom of the back is 16-3/4" and it measures 12" top to bottom, NOTE: These seat backs mount to the steel pan that has three clips and two bolts. NOTE: These will not fit DE40 and MGIV models. Click on this picture to see the chart of available colors.

Bolt in Replacement Seats, DE40, MGIV, & 82-86
Price: $277.50

Part Number: BD115

OEM Part Numbers -

Item Description -
Set of Two Bolt-in Custom Replacement Seats for 1976 to 1978 Harley Davidson model DE40 and 1979 to 1982 model MGIV as well as 1982 to 1983 models D3 and DX4. Also gas and electrics to to 1986.. All seats are made with marine grade vinyl and have a sewn in moisture barrier between the vinyl and the cushion. You can have one color or a two tone with the pleated insert a different color. Choose from the following colors: Black Pleated, White Pleated, Grey Pleated, Orange Pleated, Red Pleated, Blue Pleated , Yellow Pleated, White, Orange, Grey, Black, Dark Blue (regimental), Light Blue, Tan, Dark Red, Red, Yellow, Dark Green (hunter), Beige (buff). When ordering online put your color preferences in the shipping comments box or you can call in your order. Your custom seats will ship in one to two weeks. Seat bottom measures 16-1/2" x 14-1/4", the top of the back is 14-1/4" wide and the bottom of the back is 16-3/4" and it measures 12" top to bottom, Click on this picture to see the chart of available colors.

Rear Bench Seat
Price: $224.50

Part Number: BD115B

OEM Part Numbers -

Item Description -
NOW AVAILABLE! Matching Rear Bench Seat to match your Custom Harley Seats. All seats are made with marine grade vinyl and have a sewn in moisture barrier between the vinyl and the cushion. You can have one color or a two tone with the pleated insert a different color. Choose from the following colors: Black Pleated, White Pleated, Grey Pleated, Orange Pleated, Red Pleated, Blue Pleated , Yellow Pleated, White, Orange, Grey, Black, Dark Blue (regimental), Light Blue, Tan, Dark Red, Red, Yellow, Dark Green (hunter), Beige (buff). When ordering online put your color preferences in the shipping comments box or you can call in your order. Your custom seats will ship in one to two weeks. NOTE: These will work for many other applications as well. Click on this picture to see the chart of available colors. NOTE: Seat measures 18" by 27". Custom widths available at no additional charge up to 42". Extra charge over 42".

Colored Bench Seat
Price: $273.45

Part Number: BD615

OEM Part Numbers -

Item Description -
Colored Replacement Seat for model 512 and earlier Melex with split back seats and 1971 to 1993 E-Z-GO pre-Medalist/TXT. NOTE: This seat can replace and upgrade the split bottom seats on Melex models 102, 202, 112, 212, 152, 252, and 412. All seats are made with marine grade vinyl and have a sewn in moisture barrier between the vinyl and the cushion. You can have one color or a two tone with the pleated insert a different color. Choose from the following colors: Black Pleated, White Pleated, Grey Pleated, Orange Pleated, Red Pleated, Blue Pleated , Yellow Pleated, White, Orange, Grey, Black, Dark Blue (regimental), Light Blue, Tan, Dark Red, Red, Yellow, Dark Green (hunter), Beige (buff). When ordering online put your color preferences in the shipping comments box or you can call in your order. NOTE: The bottom measures 40 inches wide by 20 inches deep. The bottom cushions are 4 inches thick and the back cushions are are 3" thick. NOTE: Click on image to see your color choices. You can choose any combination you decide. These are custom made seats and require a week or two to be made and shipped.

Ignition Points
Price: $28.79

Part Number: IG202B

OEM Part Numbers - 16903-G1

Item Description -
Ignition Points Set for 1980 to 1981 E-Z-GO with 2 cycle engine. NOTE: These are extremely rare. For sale until stock is depleted..